Lantronix Micro125 driver and firmware
Drivers and firmware downloads for this Lantronix item
Related Lantronix Micro125 Manual Pages
Download the free PDF manual for Lantronix Micro125 and other Lantronix manuals at ManualOwl.com
Micro125 - Product Brief - Page 1
... interface Two serial ports Accepts 5 VDC regulated input power HTTP, serial, Telnet and SNMP management Flash ROM for easy software upgrades Custom protocol support available 256-bit AES encryption for secure communications
Embedded Device Server™ Micro125
Build 10/100 Base-T Ethernet Connectivity into Your Products Quickly and Economically
The Lantronix Micro125 is a board-level product...
Micro125 - Product Brief - Page 2
... login Security Optional 256-bit AES Password protection
System Software Flash ROM standard: downloadable from a TCP/IP host (TFTP) or over serial port
Diagnostic LEDs Serial Channel Status Ethernet Link Status Diagnostic Information
Compatibility Ethernet: Version 2.0/IEEE 802.3
Power Requirements 5 VDC +/-5% at ~ 200 mA
Memory Flash: 512K RAM: 256K - zero wait
Environmental Standard Temperature...
Micro125 - User Guide - Page 2
... not explicitly approved by Lantronix will void the user's authority to operate this device.
Revision History
Date
Rev. Firmware Comments
March 2011 A
6.7.0.2
Initial release
March 2013 B
6.8.0.4
Updated for firmware release 6.8.0.4.
For the latest revision of this product document, please check our online documentation at www.lantronix.com/support/documentation.
Micro125 User Guide
2
Micro125 - User Guide - Page 5
... User Interface 63
Using TFTP: Command Line Interface 64
Recovering the Firmware Using the Serial Port and DeviceInstaller _________ 65
11. Monitor Mode
66
Entering Monitor Mode Using the Serial Port 66
Entering Monitor Mode Using the Network Port 66
Monitor Mode Commands 66
12. Troubleshooting
69
Problems and Error Messages 69
Technical Support 72
Micro125 User Guide
5
Micro125 - User Guide - Page 6
... 26 Figure 5-7. TCP Connection Settings 29 Figure 5-8. UDP Connection Settings 32 Figure 5-9. Applying Settings 34 Figure 5-10. Applying Default Settings 34 Figure 6-1. MAC Address 36 Figure 6-2. Setup Menu Options 36 Figure 8-1. Serial Port Parameters 41 Figure 8-2. Hostlist Option 47 Figure 9-1. Expert Settings 56 Figure 9-2. Security Settings 58 Figure 10-1. TFTP Window 64
List of...
Micro125 - User Guide - Page 7
...) settings
Details the serial port settings.
Details expert, and security settings and explains how to reset the unit to factory default values.
Provides instructions for obtaining the latest firmware and updating the Micro125.
Provides instructions for accessing and using the command line interface for monitoring the network and diagnosing problems.
Describes common problems and error messages...
Micro125 - User Guide - Page 10
....
TCP, UDP, and Telnet for connections to the serial port. TFTP for firmware and web page updates. IP for addressing, routing, and data block handling over the network. User Datagram Protocol (UDP) for typical datagram applications in which devices interact
with other devices without maintaining a point-to-point connection.
Configuration Methods
For the...
Micro125 - User Guide - Page 14
..., configures, upgrades, and manages Lantronix Device Servers. It can be downloaded from the Lantronix website at www.lantronix.com/support/downloads.
For instructions on using DeviceInstaller to configure the IP address and related settings or for more advanced features, see the DeviceInstaller Online Help.
Installing DeviceInstaller
To install DeviceInstaller:
1. Download the latest version of...
Micro125 - User Guide - Page 16
...
Device Details Settings
Description
Comments
Device Family Type ID Hardware Address Firmware Version Extended Firmware Version Online Status
IP Address IP Address was Obtained
Subnet Mask Gateway Number of COB partitions supported Number of Serial Ports TCP Keepalive Telnet Supported Telnet Port Web Port Maximum Baud Rate Supported
Configurable field. Information about the Micro125...
Micro125 - User Guide - Page 17
... Using DeviceInstaller
Device Details Settings
Description
Firmware Upgradeable
Supports Configurable Pins
Supports Email Triggers
Supports AES Data Stream
Supports 485
Supports 921K Baud Rate
Supports HTTP Server
Supports HTTP Setup
Supports 230K Baud Rate
Supports GPIO
Non-configurable field. Displays True, indicating the Micro125's firmware is upgradeable as newer versions become available...
Micro125 - User Guide - Page 36
... unit's serial port.
2. Set the terminal emulator serial port settings to 9600 baud, 8 bits, no parity, 1 stop bit, no flow control.
Note: The Micro125 always uses these serial port settings on boot-up.
3. Reset the Micro125 unit by cycling the unit's power (turning the power off and back on). Immediately upon resetting the device, enter three lowercase x characters (xxx).
Micro125 User Guide
36
Micro125 - User Guide - Page 58
...Web from configuring the device.
Select 6 to configure security settings.
Figure 9-2. Security Settings
Disable SNMP (N) ? SNMP Community Name (public): Disable Telnet Setup (N)? Disable TFTP Firmware Update (N)? Disable Port 77FEh (N)? Disable Web Server (N)? Disable Web Setup (N)? Disable ECHO ports (Y)? Enable Encryption (N)? Enable Enhanced Password (N)?
Disable SNMP
This setting allows you to...
Micro125 - User Guide - Page 59
... Mode: Advanced Settings
Disable TFTP Firmware Upgrade
This setting defaults to the N (No) option. The Y (Yes) option disables the use of TFTP to perform network firmware upgrades. With this option, you can download firmware upgrades over the serial port using DeviceInstaller's Recover Firmware procedure. (See 10: Firmware Upgrades.)
Disable TFTP Firmware Update (N) : _
Disable Port 77FE (Hex)
If...
Micro125 - User Guide - Page 63
...Upgrades
Obtaining Firmware
You can obtain the most up-to-date firmware and release notes for the unit from the Lantronix web site (www.lantronix.com/support/downloads) or by using anonymous FTP (ftp.lantronix.com/pub).
Reloading Firmware
There are several ways to update the unit's internal operational code (*.ROM): using DeviceInstaller (the preferred way), using TFTP, or using the serial port...
Micro125 - User Guide - Page 64
Figure 10-1. TFTP Window
10: Firmware Upgrades
6. Click the Upload Now button to transfer the file to the unit. The unit performs a power reset after the firmware has been loaded and stored.
Using TFTP: Command Line Interface
To download new firmware from a computer:
1. Enter the following from a TFTP command line interface: tftp -i put
The following examples demonstrate the TFTP command...
Micro125 - User Guide - Page 65
...download the *.ROM file over the serial port. To recover firmware:
1. Start DeviceInstaller. If your PC has more than one network adapter, a message displays. Select an adapter and click OK.
2. From the Tools menu, select Advanced/Recover Firmware. The Serial Port Firmware Upgrade window displays.
3. For Port on PC, enter the COM port on the PC that is connected to the serial port of the Lantronix...
Micro125 - User Guide - Page 72
....com Firmware downloads, FAQs, and the most up-to-date documentation are available at www.lantronix.com/support. When you report a problem, please provide the following information: Your name, and your company name, address, and phone number Lantronix model number Lantronix MAC number Software version (on the first screen shown when you Telnet to port...
Micro125 - Integration Guide - Page 2
.... Printed in the United States of America.
Ethernet is a trademark of XEROX Corporation. UNIX is a registered trademark of The Open Group. Windows is a trademark of Microsoft Corporation.
Contacts
Lantronix Corporate Headquarters
167 Technology Drive Irvine, CA 92618, USA
Phone: 949-453-3990 Fax: 949-450-7249
Technical Support Online: www.lantronix.com/support
Sales Offices
For a current list of...
Micro125 - Integration Guide - Page 6
...Additional Documentation
Visit the Lantronix website at www.lantronix.com/support/documentation for the latest documentation and the following additional documentation.
Document Micro125 User Guide Device Installer User Guide
Com Port Redirector User Guide
Description
Provides information needed to configure, use, and update the Micro125 firmware. Provides instructions on using the Windowsbased...
Micro125 - Integration Guide - Page 12
...Micro125 Technical Specifications
Category CPU, Memory
Firmware Serial Interface
Serial Line Formats
Board Dimensions
Weight Modem Control Flow Control Network Interface Compatibility Power Requirements Protocols Supported
LEDs
Management
Security Internal Web Server
Temperature
Description
Lantronix DSTni-EX 186 CPU, 256-Kbyte zero wait state SRAM, 512-Kbyte flash, 16-Kbyte boot ROM
Upgradeable...