Lantronix XPress-DR-IAP driver and firmware
Drivers and firmware downloads for this Lantronix item
Related Lantronix XPress-DR-IAP Manual Pages
Download the free PDF manual for Lantronix XPress-DR-IAP and other Lantronix manuals at ManualOwl.com
UDS1100-IAP - Multi-Master DF1 Protocol User Guide - Page 5
... allows you to set up a small peer-to-peer network.
An IAP Device Server with Lantronix Standard Tunneling Firmware allows most DF1 serial slaves to be accessed remotely through Ethernet. However, the firmware is limited to one socket representing one master at a time. There is no way to have two masters access at once and share the serial port. Also, if the...
APS: Modbus Protocol User Guide - Page 18
...) option disables the use of TFTP to perform network firmware upgrades. With this option, you can download firmware upgrades over the serial port using DeviceInstaller's Recover Firmware procedure.
Disable TFTP Firmware Update (N) ? __
Port 77FEh
Port 77FE is a setting that allows DeviceInstaller custom program to locate and configure the unit remotely. You may wish to disable this capability for...
XPress-DR / XPress-DR-IAP - Product Brief - Page 1
... connected device. Existing COM-port based Windows ® applications can access network-enabled devices using our Com Port Redirector software. Redirector software allows the creation of virtual serial ports, which can be mapped to the remote device servers over Ethernet and connected to the XPress DR and XPress DR-IAP.
The XPress DR-IAP installable communication drivers allow speci c support...
XPress-DR / XPress-DR-IAP - Quick Start Guide - Page 2
... manual for troubleshooting network problems. 2. From the Ping Device window, you can ping devices not listed in the main window by entering a new address in the IP address field.
DSTni-XPress DR-IAP devices allow you to install a protocol such as MODBUS Bridge for your automation application. Skip Step 5 if you have a DSTni-XPress DR..
Step 5: Upgrade the Firmware
1. Click the Upgrade Firmware...
XPress-DR / XPress-DR-IAP - User Guide - Page 9
... 3-7 3.3.4 Update Settings 3-9 3.3.5 Technical Support 3-9 3.4 Configuring via the Setup Mode Window 3-10 3.4.1 Using a Telnet Connection 3-10 3.4.2 Using the Serial Port 3-12 3.5 Server Configuration (Network Configuration 3-12 3.5.1 IP Address 3-12 3.5.2 Set Gateway IP Address 3-12 3.5.3 Netmask: Number of Bits for Host Part 3-12 3.5.4 Change Telnet configuration password 3-13...
XPress-DR / XPress-DR-IAP - User Guide - Page 10
... Port Redirector 5-2 5.3 Using Redirector 5-3 5.3.1 Port Setup 5-4 5.3.2 Comm App Setup 5-4 5.3.3 IP Service Configuration 5-5 5.3.4 IPX Service Configuration 5-5 5.3.5 Port Settings 5-6 5.3.6 Listen Mode 5-6 5.3.7 Silent Mode 5-7 5.3.8 TCP Keepalive 5-7
6. Troubleshooting...6-1 6.1 Technical Support 6-1 6.1.1 Technical Support 6-1
7. Monitor Mode ...7-1
iv
DSTni-XPress DR User Guide
XPress-DR / XPress-DR-IAP - User Guide - Page 12
... Configuration on the Web Browser 3-6 Figure 15 - Setup Mode Window (Standard Tunneling 3-11 Figure 16 - Device Installer...4-2 Figure 17 - Search Network Window 4-3 Figure 18 - Devices in a Group 4-3 Figure 19 - Upgrade Firmware 4-4 Figure 20 - TFTP Dialog Box 4-5 Figure 21 - Main Window ...5-2 Figure 22 - Sample Setup Record in Intel Hex Format 8-3
vi
DSTni-XPress DR User Guide
XPress-DR / XPress-DR-IAP - User Guide - Page 18
... from the Lantronix web site.
You can set up the unit using the serial port, or remotely over Ethernet using Telnet or a web browser. The CD that comes with your Device Server includes DeviceInstaller, a Windows based configuration software that simplifies the process of installing protocols and configuring them for use with attached devices. IAP Device Servers use Flash memory for maintenance...
XPress-DR / XPress-DR-IAP - User Guide - Page 55
... Password must be enabled)
3.3.4 Update Settings
Click the Update Settings button to send all changed settings to the device.
3.3.5 Technical Support
Several buttons provide direct links to Technical Support functions. You can use the Tech Support button to link directly to the Lantronix Tech Support web page, the FTP-Site button will link you to the web page for downloading new firmware, manuals...
XPress-DR / XPress-DR-IAP - User Guide - Page 56
... 9999. 2. Click OK. 3. The Lantronix Universal Device Server window displays.
*** Lantronix Universal Device Server *** Serial Number 2D000054 MAC address 00204A2D0036 Software version 05.1b6 (020919) DLX
Press Enter to go into Setup Mode
4. To enter the Setup Mode, you must press Enter within 5 seconds. The configuration settings will appear. See Figure 15 - Setup Mode Window on page 3-11.
Note...
XPress-DR / XPress-DR-IAP - User Guide - Page 75
... the serial port. You can also update the unit's internal Web interface (*.COB) via TFTP or DeviceInstaller.
The firmware files are located on the software CD in the firmware folder and they are installed in the Program Files\DeviceInstaller\Firmware folder. Here is a list of typical names for those files. Check the Lantronix web site for the latest versions and...
XPress-DR / XPress-DR-IAP - User Guide - Page 76
... the file on your software CD, you can use DeviceInstaller to install it. 1. Download the updated firmware files from www.lantronix.com or ftp.lantronix.com and
store them in a subfolder on your computer. 2. Click the Start button on the Task Bar and select Programs\DeviceInstaller\Device
Installer. The Device Installer window displays.
Figure 16 - Device Installer
4-2
DSTni-XPress DR User Guide
XPress-DR / XPress-DR-IAP - User Guide - Page 77
...Click the Start Search button. A list of all active units on the local network displays. 6. Click the Save button. A confirmation message displays. 7. Click OK. 8. Click the Back button to return to the Device Installer window. The Device Installer
window now lists all of the devices in the group, including the unit you are updating.
Figure 18 - Devices in a Group
DSTni-XPress DR User Guide
4-3
XPress-DR / XPress-DR-IAP - User Guide - Page 78
...box, select the firmware currently installed. (Example: XPress Family IAP) This selection must match the installed Firmware file type or an error message will be displayed.
11. In the Source FW File field, locate the firmware file from the software CD or the file you downloaded from the Lantronix web site. (Example: AQDX0510.ROM)
12. Click the Update FW File button. Upgrade status process messages...
XPress-DR / XPress-DR-IAP - User Guide - Page 79
... unit's Monitor Mode (see Monitor Mode on page 7-1). 2. Send the firmware to the receiving unit using the SF command, where x.x.x.x is the
receiving unit's IP address.
SF x.x.x.x
The receiving unit performs a power reset after the firmware has been loaded and stored. Note: You can only update your unit 's internal Web interface using TFTP or Device Installer.
DSTni-XPress DR User Guide
4-5
XPress-DR / XPress-DR-IAP - User Guide - Page 80
...) version. 4. After the final record is received, the unit checks the integrity of the firmware image
before programming the new firmware in the flash ROM. The following message displays when the firmware upgrade is complete.
*** NodeSet 2.0 *** 0>DL 02049 lines loaded.
Note: You can only update your unit 's internal Web interface using TFTP or Device Installer.
4-6
DSTni-XPress DR User Guide
XPress-DR / XPress-DR-IAP - User Guide - Page 81
... to your network card, and the server must support IPX/SPX connections to its serial ports.
Customer Application
Serial Data
Local Serial (COM) Port
Redirector
Ethernet Network
Device Server
Remote Serial Data to/from Attached Device
PC
5.2 Installing Comm Port Redirector
The Comm Port Redirector software is included on the product CD or it can be downloaded from the Lantronix web site...
XPress-DR / XPress-DR-IAP - User Guide - Page 96
...TCP Connection Table Network Connection Reset Send/Set IP Address
Quit Get configuration from memory page Set configuration to memory page
Function Download firmware to the Device Server via the serial port in hex format Send firmware to Device Server with IP address x.x.x.x Query software header record (16 bytes) of Device Server with IP address x.x.x.x Get configuration of Device Server with IP...
Automation Protocol Suite (APS) Datasheet - Page 1
... industrial protocols. The APS is provided on a CD-ROM and is shipped with all IAP Device Server products.
• Installable communication drivers provide specific industrial device support
• Windows® based configuration software simplifies the process of communication driver installation and setup
• Multi-Master support allows a single device to share data with multiple other...
APS: Installing Protocols - Page 6
.... The File download successful message displays. 5 Click OK.
Note: If desired, run another query to confirm that the protocol has been installed.
Telnet to the Device Server To view or update the Device Server configuration, you first open a Telnet connection.
1 Click the Telnet
icon or select Tools! Telnet to Device. The Configuration
Set-Up window for the protocol displays.
2 Continue...